2018 National Non-oxide Powder and Ceramic Preparation Technology Innovation Exchange Meeting
Abrasive Stock Network invites silicon carbide enterprises to participate in technology innovation exchange meeting
September 12-14, Weifang, Shandong
Ceramics are widely used in industry. Non-oxide ceramics occupy a relatively large proportion in ceramics. Compared with oxide ceramics, non-oxides rarely exist in nature. It is necessary to manually synthesize raw materials and then make them according to ceramic technology. In ceramics, since free enthalpy of non-oxide standard formation is generally greater than the corresponding oxide standard, free enthalpy is formed. Therefore, oxides are easily formed during synthesis of raw materials and ceramic sintering, so protective gases (such as N2, Ar, etc.) must be used. In addition, the non-oxides are generally strongly bonded covalent bonds, and therefore, they are generally more refractory than oxides and difficult to sinter.
Because of its many excellent properties, non-oxide ceramics are widely used in different fields.
Concerns 1. Preparation of non-oxide powder
Powder is the raw material of industrial raw materials. The important indicators for characterizing ceramic powder are particle size, particle size distribution and particle morphology. This index is directly related to various properties of ceramics. High quality ceramics usually require high purity of powder raw materials. Superfine, non-agglomerated and other elements; the preparation of high-quality powder usually has physical methods and chemical methods, the physical method is simple, the large particles are pulverized into small particles by mechanical action, the process may be mixed with impurities; chemical methods include gas phase synthesis , thermal decomposition method, hot pressing sintering method, arc plasma method, vapor deposition method, etc., chemical methods generally have the disadvantages of complicated process, expensive equipment, demanding raw materials, and certain risks; therefore, non-oxidation in different application fields Ceramics need to choose different raw material preparation methods according to market value.
Concerned point 2, non-oxide ceramic forming and sintering process
The chemical bonds between oxide atoms are mainly ionic bonds, while non-oxides are generally covalent bonds with strong bonding. Therefore, non-oxide ceramics are generally more refractory and difficult to sinter than oxides, and non-oxide ceramics have sintering methods. Atmospheric pressure sintering, reaction sintering, hot press sintering, hot isostatic pressing, etc.;
In practice, different production processes are usually selected according to the composition and bonding characteristics of the ceramics. Then, according to which specific factors, the appropriate molding process is selected to eliminate and control the defects such as cracking, deformation and grain growth during the sintering process. The regulation of the interface structure to ensure production efficiency and product accuracy, while reducing the production cost of the enterprise, is particularly important for the preparation of fine ceramics.
Focus 3, the application of non-oxide materials
Non-oxide ceramics have many excellent properties, such as low coefficient of thermal expansion, high strength, high hardness, self-lubricity, chemical abrasion resistance, and good thermal shock resistance and mechanical impact resistance. Common silicon carbide ceramics are good at high temperatures. Structural ceramic materials and heating elements; boron nitride ceramics can be used as high temperature bearings, and are also ideal for high temperature insulation and heat dissipation materials, metallurgical containers and high temperature abrasive materials; silicon nitride ceramics are currently used in ceramic engines, bearings, circuit boards, etc. It is considered to be a new material with excellent comprehensive performance in the field of structural ceramics and the most promising alternative to nickel-based alloys in high-tech and high-temperature fields; other such as titanium carbide, boron carbide, aluminum nitride, sialon, etc. They have obtained different uses in different fields. It is believed that with the advancement of technology, a larger amount of non-oxide ceramic materials will be applied.
Prepare meeting topics (may be adjusted at that time)
1. Preparation and application technology of silicon carbide ceramic membrane
2. Preparation and application technology of silicon carbide ceramic fiber
3. Preparation and characterization of silicon carbide whiskers and granules
4. Research on molding and sintering technology of carbide ceramics
5. Application of silicon carbide/boron carbide ceramics in the field of bulletproof armor
6. Application of silicon carbide powder in the field of automotive brake pads
7. Application of silicon nitride combined with silicon carbide materials in the field of refractories
8. Development and production of silicon carbide ceramic heat exchange tubes
9. Preparation and application of boron carbide abrasive powder
10. Application of boron carbide ceramics in the field of sand blasting machinery
11. Development and application of advanced preparation technology and technology of nitride powder
12. Development and application of boron nitride in the preparation process and technology of drill bits, abrasive materials and cutting tools
13. Quality inspection and control technology of nitride powder
14. Discussion on powder production and application technology of aluminum nitride
15. Application of silicon nitride in the field of structural ceramics such as grinding media and bearings
16. Toughened silicon nitride bonded silicon carbide ceramic composite material and preparation thereof
More topics are inviting...
Meeting time and place
1. Meeting place: Shandong Weifang (a week before the detailed address meeting)
2, meeting schedule
September 12, 2018 (full-day report)
September 13, 2018 09:00-17:30 Technical exchange
September 14, 2018 09:00-12:00 Visit, study and exchange
International Powder Testing and Control Federation Industrial Application Committee
Laboratory of Powder Engineering, School of Materials, Tsinghua University
Weifang City Fangzi District People's Government
Yingkou Tianyuan Chemical Research Institute Co., Ltd.
Dongda Weifang Special Ceramics Research Institute
Tangshan Shibang Ceramic Equipment Co., Ltd.
Zibo Qixing New Material Co., Ltd.
Wuxi Qunzhen Drying Equipment Co., Ltd.
Changxing Tsinghua Powder and New Materials Engineering Center Co., Ltd.
Zibo Qingda Powder Material Engineering Co., Ltd.
1. Before August 20, the payment will be 1,500 yuan / person, and then the on-site payment will be 1,800 yuan / person (including meals, materials, conferences, etc.);
2, students 800 yuan / person;
3. Non-oxide ceramics procurement demand unit: 800 yuan / person;
Account Name: Changxing Tsinghua Powder and New Materials Engineering Center Co., Ltd.
Bank: Industrial and Commercial Bank of China Co., Ltd. Changxing County Longshan Branch
Bank account number: 1205 2704 0920 0017 997
Due to the inability to issue invoices due to on-site payment, it can only be mailed afterwards. Please send money in advance! Please send the remittance slip and return receipt to the association secretariat in time after remittance.
Co-organizer: 30,000 yuan
Make a special speech on the spot; 5 participants; the name or logo of the unit appears on all media advertisements and conference promotional materials; the brochure is included in the information kit; one booth; publicity push on the website of the organizer and the public number;
Sponsor: 10,000 yuan
Board the company name logo on the conference background board; 3 participants; brochures into the information kit; one booth; publicity push on the organizer's website and public number;
Support unit: 0.8 million yuan
2 participants; one booth; publicity and promotion on the website of the organizer and the public number;
Booth fee: 0.6 million yuan
Two participants, one table, two chairs, and one roll-up
Dinner sponsorship, information package sponsorship, gift sponsorship, special report, etc. Please contact the conference group
Sponsors need to pay in advance
Mr. Sun 010-56039451, 17310491949
Mr. Wu 010-62772135, 18513265334
Wushaojun@chinapowder.com Abrasive Stock Network accepts submissions in any way
After adoption, the corresponding payment will be paid.
The content must be original and not plagiarized or pseudo-original.
Submission email: email@example.com
Topic：Abrasivestocks.com hope to meet you on “Highly-Functional Material Week Japan” from Dec.5 to Dec.7, 2018
Topic：The overseas business division of abrasivestocks.com participated in the 16th international machine tool exhibition in Beijing