Crushed walnut shell / nut shell powder abrasives for filler PV:3295
-
Category:Walnut Shell
SPEC:10#
Packaging:Bag Package/Small Bag Package
WALNUT SHELL FILLER
We
produced ground walnut shell grits and flours are produced for the
adhesives, construction, resin, plywood, pigments, laminated veneer lumber,
furniture, rubber, ceramics, dynamite, paint, cosmetics tile and livestock feed
industries with mesh sizes varied from coarse walnut
shell to walnut shell flour.
According to specific needs, we will produce
the proper mesh sizes of walnut shell for you.
- For non-skid and anti-slip
applications, ground walnut shell is an excellent paint additive for
stairs, floors, pools, decks and ramps.
- In plastics and rubber compound
manufacturing, walnut shell flour is a preferred additive.
- In burn-out applications, walnut shell
is used to porosity in ceramics.
- In rock tumbling, walnut shell media is excellent filler for tumbling gemstones because it s a barrier between stones during the tumbling process.
SPECIFICATIONS
Specific Gravity |
1.2-1.4 |
Solubility |
Insoluble |
Volumetric Weight |
850kg/m3 |
Proportion |
1.2-1.5g/cm3 |
Rind Puffing Rate |
3% |
Wear Rate |
<=1.5% |
Oil Removal Efficiency |
90-95% |
Void Ratio |
47 |
Charring Temperature |
243℃(470°F) |
Bulk Density |
0.8g/cm3 |
Back washing Strength |
25m3/m2h |
Particle Shape |
Irregular |
Water Flushing Pressure |
0.32MPa |
Filtration Rate |
20-26m/h |
PH at 25℃ in neutral water |
4-6 |
Oil Content |
0.25% |
APPLICATIONS |
Non-Skid, Anti-Slip, Paint, Coatings, Burn-Out,
Filtration |
USED ON |
Adhesives, Construction, Resin, Plywood, Pigments,
Laminated Veneer Lumber |
Furniture, Rubber, Ceramics, Dynamite,
Paint, Cosmetics, Tile and Livestock
Feed |
INDUSTRIES |
Paint and Coatings, Plastics and Rubber Compouding, Oil
Drilling, Ceramics
Manufacturing |
WALNUT SHELL GRIT SIZES |
6/10 8/12 12/20 18/40 35/60 40/100 60/200 |
WALNUT SHELL FLOUR SIZES |
#100 #200 #325 #400 |